水稻根系分布与叶角关系的研究初报

1983—1984年,通过群体水培、土培试验,在控制水稻根系不同分布空间形状情况下,研究了叶角与根系分布的关系,其结果主要表现如下:1.根系分布较深且多纵向时,叶角较小,叶片趋向于直立;根系分布较浅且少纵向时,叶角较大,叶片趋向于披垂。2.叶角的大小同时受叶片大小的影响,根系分布较浅且少纵向时,较大的叶片更易披垂,叶角更大,     

Cotyledon angle as a predictor of growth rate of cucumber plant

Summary Experiments conducted in the greenhouse and in the field indicated that plants produced from seedlings of Cucumis sativus L. which displayed their cotyledons in an upward position grew faster than plants which displayed their cotyledons in a downward position. Cotyledon angle was not a function of seed size nor seedling weight at 10 days after planting. An increase in plant height, node number, and fresh weight at later growth stages was associated with an upward cotyledon angle and persisted until time of harvest. Anthesis tended to occur later in plants having a downward cotyledon angle. The number of pistillate flowers was greater in plants with an upward cotyledon angle compared to those with a downward cotyledon angle. Differences in yield (fruit number) were not associated with cotyledon angle.Paper No. 5432 of the Journal Series of the North Carolina Agricultural Experiment Station, Raleigh, NC. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Experiment Station of products named, nor criticism of similar ones not mentioned.     

Improvement of durum wheat-plant type,yield potential,and adaptation

Summary Improvement of durum wheat at the International Maize and Wheat Improvement Center (CIMMYT) was achieved by exploiting the variability of the tetraploid species in large numbers of combinations, and multi-location testing of germplasm on a world wide base. High yielding, widely adapted durums with short straw, good fertility, and adequate earliness were selected for distribution to major durum growing countries. Present attempts to improve durum wheat are directed at adjusting agronomic traits such as leaf angle and straw strength, and increasing spike fertility and spike size, thereby reaching higher grain numbers per unit area and higher yield potential. Diversification of the developmental pattern and incorporation of drought tolerance aim at further widening adaptation.     

Inheritance of leaf angle in Triticum aestivum L.

Summary A 6×6 diallel was prepared to study the inheritance of leaf angle in T. aestivum L. Genetic analysis in terms of diallel cross parameters and graphic analysis indicated the control of additive gene effects in the expression of this character. The results of F₁ analysis were supported by the analysis of F₂ data.     

泥石流入汇主河淤积规律的水槽试验研究

以试验为基础,研究了泥石流入汇主河后淤积规律,主要探讨了淤积量及淤积分布问题。通过试验分析认为,泥石流入汇主河后的淤积量基本随流量比的增大而增大,就其淤积速率而言,有先增大后减小的变化规律。淤积量在流量比大约为0.5时出现峰值,在流量比为0.65时出现谷值,淤积量与流量比关系变化曲线以倾斜向上的直线为对称轴,呈倾斜向上的正弦波形。各工况下淤积范围基本不变,但试验中反映出,淤积范围有随交汇角增大而增大的趋势。     

外掺植物纤维对冻融作用下植被混凝土抗剪强度的影响

[目的]研究外掺2种植物纤维对冻融作用下植被混凝土抗剪强度的影响,为植被混凝土生态防护技术在高寒地区的应用提供科学依据。[方法]参考相关标准(GB/T50082-2009)中的慢冻法,采用2因素3水平全面交叉试验开展研究。[结果]未掺植物纤维的植被混凝土,冻融后黏聚力显著减小,内摩擦角变化不明显。掺入植物纤维可使经受5次冻融循环作用后植被混凝土的内摩擦角平均增加5°左右,并且随植物纤维掺量的增加,内摩擦角变化无明显规律,黏聚力则呈先增加后减小的趋势。表明纤维加筋对黏聚力的贡献存在临界掺量。棕纤维掺量对黏聚力的影响比黄麻纤维掺量更为敏感。[结论]外掺植物纤维可有效改善植被混凝土抵抗冻融破坏的能力,棕纤维和黄麻纤维的建议掺入比为0.6%和0.6%,具备推广应用前景。     

基于理想传动比的主动前轮转向控制

针对目前汽车主动前轮转向系统缺少对理想传动比规律研究的问题,建立线性二自由度车辆模型、主动前轮转向系统模型,以及轮胎模型;设计固定横摆角速度增益下的主动前轮转向系统理想传动比规律,提出基于该规律的主动前轮转向附加转角闭环控制策略,并对提出的控制策略进行仿真分析和试验验证。结果表明:基于理想传动比的前轮主动转向附加转角控制策略可有效保证车辆在低速时横摆角速度响应幅值变大,车辆具有较好的操纵性;高速时横摆角速度和质心侧偏角响应的幅值均变小,车辆具有较好的稳定性,有利于车辆获得较为理想的转向品质。研究结果可为主动前轮转向系统的设计与开发提供理论基础。     

基于转轮进口水流角的贯流水轮机最优工况应用

贯流式水轮机是农村小水电电网中的重要组成部分,其低水头、大流量的特点,易导致电站机组效率低下、出力降低。而贯流式水轮机运行中的最优运行问题很少引起学者关注,目前最优工况的研究仅仅局限于某点或线。该文从转轮水力损失的角度,理论上分析了影响贯流式水轮机效率的翼型阻力损失、端部损失与撞击损失,依据现场实际导叶与桨叶翼型,在定水头、定桨叶方式下,通过改变转轮进口水流角,对转轮进、出口速度三角形进行计算,从能量角度,进行工况优化,得到转轮10°工况下导叶在53.9°~58.8°的最优特性区域,效率可提高约3%~8%。利用数值仿真技术,对其工况做相应的数值仿真,并进行流场分析,在此基础上,进行真机试验,结果与理论分析相符,与数值仿真计算的误差小于2%,采用此方法对电站机组的全工况进行了计算,全工况范围内进行区域工况优化,得到转轮在7°~42°,导叶在0~78°的最优特性曲线,通过一段时间运行,数据显示机组的能量特性与稳定性效果比较理想。     

Effects of rake angle of chisel plough on soil cutting factors and power requirements: A computer simulation

A computer simulation was conducted to predict the effects of rake angle of a chisel plough and soil bulk density on angle of soil failure plane, rupture distance, width of side crescent, frictional, overburden, cohesion and adhesion soil cutting factors, draft forces and drawbar power requirements. The experimental work was carried out in two locations. Soil of the first location was sandy clay with the soil bulk densities of 1.75 and 1.70 g/cm³ for firm and loose soil conditions, respectively, with an angle of internal friction of 30° and a surface friction angle of 20°, cohesion of 2.5 kN/m² and adhesion of 1.2 kN/m². Soil of the second location was clay loam with the soil bulk densities of 1.65 and 1.50 g/cm³ for firm and loose soil conditions, respectively, with an angle of internal friction of 34° and a surface friction angle of 23°, cohesion of 2.4 kN/m² and adhesion of 1.14 kN/m². The prediction showed that the angle of failure plane found to decrease with the rake angle. The rupture distance decreased with the rake angle from 15° to 55° and then increased as the rake angle increased over 55°. The width of the side crescent increased as the rake angle increased and the maximum value and the minimum value were recorded at 75° and at 15°. Values of frictional and overburden factors decreased as rake angle increased. The maximum and minimum values were recorded at 15° and 75°, respectively. The values of cohesion factor increased as rake angle increased. The maximum value was recorded at rake angle of 75° and the minimum value was recorded at rake angle of 15°. Adhesion factor was found to change inversely with the rake angle from 15° to 55° and then to change directly with the rake angle over 55°. The draft force decreased with the rake angle and reached its minimum value at 45° rake angle. Over 45°, the draft force increased and reached its maximum value at 75° rake angle. The draft increased with soil bulk density. The power required for moving the plough recorded the maximum value at rake angle of 15°, while the minimum value was recorded at 55° rake angle. The values of power increased with decrease of soil bulk density. The predicted values demonstrated some deviations from the experimental values of the draft force and the drawbar power.     

Influence of the position of the foot on MRI signal in the deep digital flexor tendon and collateral ligaments of the distal interphalangeal joint in the standing horse

Reasons for performing study: Hyperintense signal is sometimes observed in ligaments and tendons of the equine foot on standing magnetic resonance examination without associated changes in size and shape. In such cases, the presence of a true lesion or an artifact should be considered. A change in position of a ligament or tendon relative to the magnetic field can induce increased signal intensity due to the magic angle effect. Objectives: To assess if positional rotation of the foot in the solar plane could be responsible for artifactual changes in signal intensity in the collateral ligaments of the distal interphalangeal joint and in the deep digital flexor tendon. Methods: Six isolated equine feet were imaged with a standing equine magnetic resonance system in 9 different positions with different degrees of rotation in the solar plane. Results: Rotation of the limb induced a linear hyperintense signal on all feet at the palmar aspect of one of the lobes of the deep digital flexor tendon and at the dorsal aspect of the other lobe. Changes in signal intensity in the collateral ligaments of the distal interphalangeal joint occurred with rotation of the limb only in those feet where mediolateral hoof imbalance was present. Conclusions: The position and conformation of the foot influence the signal intensity in the deep digital flexor tendon and in the collateral ligaments of the distal interphalangeal joint. Potential relevance: The significance of increased signal intensity in the deep digital flexor tendon and in the collateral ligaments of the distal interphalangeal joint should be interpreted with regard to the position and the conformation of the foot.